0216 – Tall Oil Finish Clear
$49.17 – $8,331.37
Matte water-based finish for interior wood, oxidized or not.
Do not change the colors.
Do not use on wood intended for damp rooms.
Description
0216 – Tall Oil Finish Clear
INFORMATIONS
Matte water-based finish for interior wood, oxidized or not.
Do not change the colors.
Do not use on wood intended for damp rooms.
If used on floors, for protection more suited to heavy traffic, use Extra Matt Varnish 0220.
PREPARATION
The wood must be dusted, dry, and free of any finish.
APPLICATION
Product ready to use.
- Application possible by brush, roller or spray, in 2 or 3 coats. Deseed if necessary. Maintain a short time between coats to avoid possible adhesion problems.
- For industrial application (roller machine), possibility of ordering the 0216T version with a viscosity of 40 seconds (cut no. 4). Maximum hardness obtained after two weeks. Clean tools with water.
Consumption is approximately 8 to 10m² per liter per layer
0216 – Tall Oil Finish Clear is packaged in: 1GL, 5GL and 15GL.
SECURITY
- It is advisable to wear rubber gloves.
- Do not allow children to carry it.
- Do not drink.
- Consult the safety data sheet
*Caution: Always test products prior to beginning any project to be certain that the desired effects are achieved.
Additional information
| size | 1 Quart, 1 Gallon Container, 5 Gallon Container, 30 Gallon Drum, 55 Gallon Drum |
|---|
Review
Delivery and Transportation Terms (Domestic) :
Stock orders up to $9999.00 are FOB Irwindale, CA, freight prepaid and added to the invoice when carrier is provided by Easy Lab USA, LLC via the lowest cost routing to destination.
Stock orders equal or above $10000 are FOB destination, freight paid in the Continental US by Easy Lab USA, LLC. For Alaska and Hawaii freight allowance will apply.
Expedited Shipments (Domestic) :
For emergency orders requiring premium routing, freight will be prepaid and add.
Need help?
(818) 606-5157
Product Availability :
Please contact Easy Lab USA, LLC Customer Service for stock availability.
You must be logged in to post a comment.