Instructions

Easy Lab USA, LLC

Makers of Patinas & Aging Products for Wood

Wood Aging by Oxidation

Instructions for use with woods high in tannins

*Always test products prior to commencing projects.*

Greying & Aging by Oxidation (Grey, Pale Grey, Cognac, Tobacco)

For woods high in tannins – Oaks, Walnut, etc.

Basic combinations:

Pale Grey #1 0842 + Let Dry + 0844 + Let Dry + H²O

Pale Grey #2 0852 + Let Dry + 0844 + Let Dry + H²O

Grey Driftwood 0842 + Let Dry + 0844 + Let Dry + 0698(100g/L) + Let Dry + PAD

Tobacco 0843

Pale Tobacco 0843 + Let Dry + 0844

Cognac 0842 + Let Dry + 0843

Pale Cognac 0842 + Let Dry + 0843 + Let Dry + 0844

Whisky 0842 + Let Dry + 0696(100g/L) + Let Dry + 0844 + PAD

Light Grey #1 0872 + Let Dry

Light Grey #2 0882 + Let Dry

Light Cognac 0873 + Let Dry

*Let dry 24 hours before applying finishes.

Instructions:

0842, 0843, 0844, 0872, 0873, 0882 (LIQUIDS) – Products are ready to use; do not dilute.

When storing products be sure to keep away from direct sunlight and areas of high heat. Store inside. Do not store in metal containers. Liquids will cover approximately 400 sqft per gallon depending on wood and application.

Prep wood (sanding, brushing, etc.)
Best applied by spray. Then, use brush to remove excess and to evenly distribute the product.
Let thoroughly dry for 1 to 3 hours at room temperature before applying the next product. Do not let dry in direct sunlight or by applying heat.

Notes: Do not shake 0842 prior to use.

0696/0698 (POWDER) – Mix 20 to 200 grams of 0696/0698 to 1 liter of water. Shake well. Allow to rest for 10 minutes. Then shake well again prior and during use. Covers approximately 450 sqft per liter at 100 grams per liter of water depending on wood and application.

Prep wood (sanding, brushing, etc.)
Best applied by spray. Thin or thick layer. Then, use brush to remove excess and to evenly distribute the product.
Let dry thoroughly.
After drying thoroughly, lightly scrub with a scouring pad such as a green Scotch Brite pad.
Remove dust with a brush or towel.
Shake well before and during use.

*Always test products prior to commencing projects.*

Greying & Aging by Oxidation

For woods low in tannins – Pine, Spruce, Fir, Poplar, etc.

0853 & 0852 (LIQUIDS) – Products are ready to use; do not dilute.

Use the 0853 first then use the 0852

Basic combinations:

0853 + 0852 + 0698

0853 + 0852 + 0843 + 0698

Instructions:

Prep wood (sanding, brushing, etc.)
Best applied by spray. Then, use brush to remove excess and to evenly distribute the product.
Let thoroughly dry for 1 to 3 hours at room temperature before applying the next product. Do not let dry in direct sunlight.
There is no need to sand prior to sealing.

FINISHES

0216 Tall Oil Finish Clear – Protection for Hardwood Floors. Water Based Tall Oil. Ready to use

For Hardwood Floors, Furniture and Woodwork. This oil emulsion is non-yellowing and leaves the wood with a beautiful natural look.

Make sure surface is clean and dust free
Apply evenly with a brush or roller
To achieve more of a sheen you may buff gently with a soft “white pad”
Do NOT apply by “rubbing” into the wood
Let dry several hours between each coat
Do not apply in direct sunlight or on excessively warm or hot surfaces.
DO NOT use cleaners or chemicals to clean floors treated with 0216 Finishing Oil. DO NOT use Natural Oil Floor cleaners. (0216 Finishing Oil is a water-based Tall emulsion).
Shake well before use

0244 Finishing Wax – Clear, Self-Shining Emulsion. Water Based. Ready to use

For Hardwood Floors, Furniture and Woodwork. This Carnauba based finishing wax gives the wood a beautiful luster and sheen. May be used in conjunction with the 0216 Finishing Oil for maximum protection.

Make sure surface is clean and dust free
Apply using a brush, sprayer or paint roller, in 1 or 2 thin, even coats. After drying, polish with a soft polishing brush or cloth.
Do not apply in direct sunlight
Do not apply on excessively warm or hot surfaces
Shake well before use

*Always test products prior to commencing projects.*

MAINTENANCE

Maintenancefor 0216 Finishing Oil:

For everyday maintenance:

Use a sponge mop dampened with lukewarm water to clean wood surfaces treated with 0216 Finishing Oil. For harder to clean stains a small drop of dish soap applied directly onto the stain, then wiped down with a damp sponge may be used. Sponge or sponge mop should be damp, not wet.

DO NOT use cleaners or chemicals to clean wood surfaces treated with 0216 Finishing Oil.

DO NOT use Natural Oil Floor cleaners.

For periodic maintenance as needed use:

0214 Easy Maintenance – For floors treated with 0216 Finishing Oil.

Sweep the surface well.
Apply with a sponge or sponge mop, wringing out excess.
Sponge or mop should be damp, not wet.

Do not apply in direct sunlight or on excessively warm or hot surfaces.

DO NOT use cleaners or chemicals to clean wood surfaces treated with 0216 Finishing Oil.

DO NOT use Natural Oil Floor cleaners.

(0216 Finishing Oil is a water-based Tall emulsion)

– Use for Hardwood Floors, Furniture and Woodwork Treated with 0216 Finishing Oil.

Maintenancefor 0244 Finishing Wax:

Dust mop or vacuum regularly. DO NOT use chemicals or cleaners.
Use a buffer with a “SOFT” polishing brush to maintain the shine.
Reapply 0244 Finishing Wax as needed. Apply using a “T-Bar” with a Lambswool Floor Coater refill as this will assure a thin even coat. DO NOT pour the 0244 Finishing Wax directly onto the floor as this will cause staining. Pour wax into a bucket, dip the applicator into the wax, remove excess, and then apply evenly. You may dilute the 0244 Finishing Wax with water up to 10% to minimize “overlap” marks. (Always test the application method in a small unseen area to make sure you achieve the desired results).

Caution

For all products:

Be sure to wear rubber gloves

Do not ingest

Do not leave within reach of children.

Easy Lab USA, LLC, PO Box 262, Monrovia, CA 91017

(626) 239-8180

easylabusa@easylabusa.com